Related Post

Image
Gardening

Don’t Cut Too Soon—The Right Way to Harvest Rosemary Without Ruining Your Plant

Fragrant rosemary is a staple in your culinary toolkit—and it's even better when you've harvested your own. Fresh rosemary is more flavorful and aromatic than dried, and the plant is easy to grow in your yard, kitchen garden, or even in a container on your patio. Here's how to harvest rosemary the right way, plus tips for storing and preserving this tasty herb for later use. When to Harvest Rosemary You can harvest small amounts of rosemary as needed at any time of year. Summer is also a good time to harvest rosemary to dry, freeze, or otherwise preserve, as warm weather and lots of daylight give the plant the conditions it needs to regrow. However, avoid taking more than 20 percent of the plant at any one time to avoid damaging it and hindering regrowth. Wait until plants are at least 3 years old before harvesting.1 The ideal time to harvest rosemary is in the morning, after any morning dew has evaporated but before the hottest part of the day. For the most flavor, consider harvesting rosemary when buds have formed on the plant but before the flowers have opened, as the oils are most concentrated during this time.2 Note that rosemary flowers are also edible and can be harvested along with the foliage. How to Harvest Rosemary the Right Way Wait until plants are 6 to 8 inches tall before taking your first harvest. Examine your rosemary plant and look for healthy, tender stems. Avoid cutting into woody stems. Use sterilized scissors or pruners to cut tender branches just below a leaf node. To harvest small amounts, cut stem tips—the 2 to 3 inches at the end of each branch. To harvest rosemary for drying or preserving, cut sections of softwood that are around 8 inches long. Avoid removing more than about a quarter of total plant growth at any one time. Wait for small plants to regrow what you've removed before harvesting again. 3 Tip You can support overall plant health by harvesting the tender tips of rosemary regularly. This can encourage a bushier, more compact growth habit while spurring regrowth. Wait until after the plant has flowered to do more significant annual pruning. How to Store Rosemary Here's how to store your rosemary harvest, whether you plan to add the fresh herb to recipes or preserve it for future use. Storing Fresh The best way to store freshly harvested rosemary is in the refrigerator. Wrap the sprigs loosely in a slightly damp paper towel, enclose them in a plastic bag without sealing it, and put them in your vegetable crisper. The herb can last for up to two weeks when stored properly.4 Drying Drying is an easy and hands-off way to preserve rosemary. Rinse sprigs off to remove any dust or dirt, but avoid getting clean sprigs wet. Allow any surface moisture to dry by laying out the rosemary on a clean, dry paper towel. Once dry, cut away any dead or damaged plant growth before tying herbs into loose bundles. Hang the bundles in a warm, dark, dry place with good ventilation. Avoid exposing the rosemary to sunlight, which can cause it to degrade and lose flavor and color prematurely. You can also dry rosemary sprigs in a food dehydrator or by laying the sprigs out on a screen, turning them frequently to help them dry evenly.2 Dried herbs retain their best flavor and aroma for 3 months after harvest when stored at room temperature or up to a year if stored in the freezer.5 Freezing Rinse rosemary sprigs or tips to remove dirt if needed, then allow them to dry thoroughly. Place the herb in a zipper-lock freezer bag and press out the air before sealing. Label the bag with the name of the herb and the date, then store it in the freezer for up to a year. Another option is to strip the leaves from each sprig and place them in ice cube trays. Top off with water or olive oil and freeze, then store the cubes in a zipper-lock bag in the freezer. Avoid refreezing rosemary after it thaws.

Read More
Image
Home Decor

Was My Custom Primary Bedroom Bed Worth It? And Do I Regret Selling It 8 Years Ago?

Nine years ago, we designed this bed for our then-primary bedroom, and I have a lot of unresolved feelings about it. So Bold! So Fun! So Big! So Expensive! The reason we are talking about it now is that you may or may not know the custom bed that is in our current bedroom was actually designed for our guest room, not our bedroom, but the bed we had ordered for our bedroom was having some shipping delays so with the photo shoot looming (2 years ago) we put that bed in our room where it hasn’t moved and cancelled the one that was on its way. That’s all to say that I’m just now getting around to figuring out what is the perfect bed for our bedroom (I don’t love the design of the room as a whole) and I’m toying with the idea of doing something custom, which reminded me of this big bold lady that we had made almost 10 years ago. But as I was picking out fabrics, I remembered that I had some regrets/learnings with this one, so it deserved more of a deep dive, with the help of some hindsight. Before The Custom Bed… Prior to designing the new bed, I had recovered this vintage tufted headboard with a navy blue fabric. It was fun, but I suppose I wanted something even more fun, LOL. BOY DID I GET IT. The Inspiration Of The Shape I loved the idea of a modern wingback design, but fully upholstered – it felt cozy and simple. At the time, one of my design assistants, Remi, pulled the dimensions from a lot of these above to work off of. I went through a huge Rebecca Atwood phase (still love her so much) and my love of blue was perhaps at its peak (never gone away, TBH), and I LOVED this marble-y pattern so much. I don’t think I really debated it too much (I was a lot braver then, not sure why!) and make the final decision pretty quickly. The Drawings To Get A Quote Remi drew it all out for the guys to get a quote. This view was specifically important to see how the corners joined within the design that we wanted. The frame was solidly built and helped us visualize it more. I remember us debating how to orient the fabric, but not for long – it was pretty clear that the marble should run horizontally on the bed like water. Something to definitely think of for anyone customizing with patterned fabric. Installed, But Not Styled Here is what she looked like before we finished the room – it’s a lot of bed. I loved it, but I had some momentary fears of it being “too much”. It turned out beautifully and exactly how we had asked for it, but it wasn’t a quiet bed. She was LOUD. The details were really rad though… we did a good job designing it and our furniture guy executed it perfectly. The Styled Out Room When I revealed it on the blog, I think it was close to unanimous that it was awesome. Once styled out with everything more balanced it it still had a huge presence but worked a lot better. I can’t tell if this room is dated or not. I still love it! Sure, there is that still bright/airy midcentury vibe that was so big in the late 2010s but there is nothing in here I wouldn’t own again (and I still have those lamps, that painting, that bench, and that rug). So Why Did I Sell The Bed Only 1 Year Later/My Learnings? The easy reason is that we moved into our house in Los Feliz, where our room was much, much smaller, and the bed had to be in front of a low window. This was a high headboard, so even if we could get the bed into the room, it would look EXTRA MASSIVE. The way we designed the side rails and the “wings” added another 12″ overall to the bed, so I don’t think that would have fit with nightstands. But secretly, I was having a lot of internal doubt about my love of color and pattern, and felt insecure that what I liked was silly. This was 2016, the beginning of Amber Interiors, Studio McGee, and of course, the Modern Farmhouse vibe Joanna Gaines popularized. I think I felt like bold choices like this would look too amateur, young, and silly — not sophisticated, refined, or neutral enough like what was about to happen. Of course, that “warm, neutral California casual” vibe would reign supreme until 2021, where everything has certainly flipped (color and pattern are certainly back). I sold this bed for $1,500 – INSANELY LOW PRICE for what I paid and how new it was. And I’m not saying it is the exact bed that I would want right now, but I do love the boldness and the no apologies that it had. It made a statement with a big side of bravery. I think it’s pretty typical to let the outside trends of the world affect the opinion of your home, while I wish we didn’t. I’m obviously not placing blame on anything or anyone, the zeitgeist is just so strong and at times outside of our control (especially when we are young). I LOVE this bed now, it represents a time when I took chances in a really bold way. Of course, spending $3k on something that you might not love for 20 years is actually the biggest risk of all, and I tend to be a lot more cautious now (taking more risks in smaller pieces or art, rather than large custom patterned furniture).

Read More
Image
Home Decor

How We Made Vintage-Inspired Corbels For The Outdoor Kitchen Gazebo

As I was designing this “kitchen gazebo,” I found almost no inspiration that looked and functioned like I wanted ours to look/feel. They were mostly big boxy McMansion-looking Texas-style structures or hexagonal sweet old timey gazebos, but I found almost no images of rectangular covered structures that looked charming and pretty. So I knew that it would have to be done in the details – i.e., custom rafter tails, or in today’s case, vintage-inspired corbels. A corbel is a structural and decorative bracket that connects the beams to the posts in the corners, creating a stronger structure and, for me, softening the harshness of the strong lines. It was a perfect opportunity to add some sweet charm and make this structure less boxy. The Original Corbels On The Covered Walkway I got the idea for them from our very own covered walkway that had corbels between each post and beam, as you can see above. I loved the sweet scrollwork and wanted to mimic that, but bigger for the gazebo (we also had four small ones leftover from the part of the walkway that didn’t make it that we put on the island – I’ll show you later). Time To Shop… So I went down to Aurora Mills, my favorite architectural salvage place, 1/2 hour outside of Portland, and shopped. My hope was to get 8 large corbels that matched, but of course, we had specific dimensions we had to stay within, and obviously, stylistically, I had my dream corbel in mind. I knew it would be a shot in the dark, but I didn’t know where else to start. If nothing else, I’d come back with some inspiration and firmer ideas. Aurora Mills had a ton of antique corbels, saved from vintage Victorian houses. It was super inspiring, and I got to really dig into their whole inventory to see if I could make anything work. I collected every single option that would fit size-wise (we needed them to be at least 4-5″ thick, at least 11″ deep, and the height had some flexibility, but the structure was big, so I was hoping for a 12×16-sized corbel. I was obsessed with all these carved out details – we just don’t do this anymore (OR – spoiler – DO WE???? :)) We tried hard to find four that matched and couldn’t. Then we were like, what if we found some that were close enough and when painted, would work together? Could 8 different corbels, all painted white, look charming and eclectic? Or just really amateur? I also took note of other architectural design elements that I liked – this is the best thing about shopping vintage, you are forced out of a box because you are beholden to what is available. I LOVED the floral design on this salvaged piece of gingerbread, and tried to make it work a few different places on the property. I LOVED the one on the left, with that sweet and simple little cut out and there were a few that were similar to it, but they were in pretty bad shape, meaning they would need repair on their own before they were even painted (this kind of work can cost a lot of money in my experience). The simpler brackets on the right were strong (and there were tons of them), so we even thought about combining the two – see below. I think the (desperate) thought here was to buy vintage/reclaimed, do something creative to make it work by taking the floral cutout and pasting it inside the simpler bracket. This is where you start realizing that you are complicating your life so much just to use something vintage (I’ve done this MANY times, with varying degrees of success/failure). We still brought them all to our house to check them out (Aurora Mills knows me and let me borrow them for a day). I LOVED how it looked, and that’s when I made the smart (albeit more expensive) decision to hire a local maker to make 8 new ones, based on the vintage design. Purl To The Rescue! I called my friend/frequent collaborator Purl (follow @total_nonsequitur) and asked him if he could make these custom corbels. He is just one of those talented makers and artists who can figure out anything and loves the challenge (he made my coffee table, my huge paint brush and pencil, my sofa table, and I have so many of his paintings). I showed him a picture of the corbel and gave him the dimensions to make sure it was all doable before he came over. Then he popped by and we went over it – in a perfect world, we would have eight large ones and four small ones, the large ones being on the main posts and the small ones on the overhang. It was a big ask – that’s 12 custom corbels, two different designs that all had to look good with each other. I wasn’t looking for a new design, though; I really just wanted that simple floral Scandi corbel replicated. So he brought that back and used it as a template to create a new one. Purl shopped for and used reclaimed wood (both for cost purposes and the make it look a bit less polished/perfect/new). He created the cut-out design with a special tool for both ends, then stacked wood in between to add the thickness that we needed. I was so excited as he sent me photo after photo. I approved them, he dropped them off (this was while I was in Belize), and my brother started hanging them. In a perfect world, they would have been done in time to paint, but we had to stick to a schedule, so our painter painted the structure and planned to come back to paint these separately. I think he used massive screws to scre them in? Not totally sure. All I know is that I came back from Belize, and it looked like this: I was THRILLED!!!! They looked SO GOOD. Once painted white, they looked sweet and pretty, but not too fussy. They actually scaled down the gazebo in my mind, softening the lines. Next up were the smaller ones to go on those ends – we had waited to start them, unsure that we 100% needed them, but once these 8 were up, I really wanted the final four small ones to make those corners even softer. I just LOVED the vibe it was creating and wanted more. I gave Purl the creative control to make the smaller ones however he wanted to work with the larger ones – he knows more about the process of making them and what would actually work based on his learnings on the larger ones (without needing to buy new equipment or experiment more). Here you can see how they all look together (and you can even look closely to see our vintage small corbels holding up the island countertop). I LOVE how they look so much. Purl did such an incredible job at making them look original and vintage – they are scaled perfectly to the gazebo and definitely soften all the rectangular lines. And then yes, my brother painted the glued the old covered walkway corbels onto the island to make it look like it’s holding up the countertops. It’s a sweet little detail that I love a lot. And that’s the story of our custom corbels. If you are wondering how much they cost, I think I paid Purl $2,900 for all 12 of them (including materials and labor). It’s not nothing, but felt fair for the amount of time and talent that went into making these custom. By the way, I looked online a lot before and found some pretty great vintage-inspired dupes on Etsy (that were around $400 each, so not that much less), but they weren’t as sweet as ours, no cut-out flower. The only thing I regret is not paying the dough to do custom rafter tails (the part of the roofline that juts out that you can see from this angle). We did them throughout our house, but it’s a substantial cost (about $1k each), so we didn’t do it> But if I could snap my fingers, those ends would also be softened by a carved out curve. More To Come… We still need to hang our pendants that didn’t come in til a week after we had to shoot. We have big 20″ copper ladies from Rejuvenation that are rad and going to be hung pretty high, so you see them but still have a sense of airiness and space. For now, the string lights provide enough light, but the pendants will look so pretty. Additionally, we might add heaters to extend our time out here by months on either end of summer, and we might have to add gutters (but really hoping not to have to spend the money). Oh, and we did buy the big custom island cover that RTA makes for each – it’s a big U-shaped cover (in addition to grill covers) that you can put on the entire thing all winter long.

Read More
Image
Travel

Shoppers ‘Pack Double or Triple’ in Their Carry-On Bags Thanks to This $30 Travel Hack That Skirts Baggage Fees

I’m a one-bag traveler through and through. Even on a recent monthlong trip through Northern Europe, I was able to fit everything I needed into a carry-on suitcase—puffer jacket included. The best way to pack a suitcase, we seasoned travelers know, is to use compression packing cubes. These clever hacks flatten soft goods to half their size, so you can pack a checked bag’s worth of contents into a carry-on suitcase. They’re the only way a recovering overpacker like me could ever join the exclusive carry-on-only club. Bagail Set of 6 Compression Packing Cubes How do compression packing cubes work? They’re super simple in construction but majorly helpful in practice. Each packing cube is a zippered pouch in ripstop nylon, with two zippers: one that closes the pouch itself, and another you can zip closed to shrink the contents to the smallest size possible. It’s the same principle as sitting on your suitcase to get it to zip—except this travel hack keeps everything nice and tight from start to finish. With clothing packed neatly into these soft nylon pouches, then zipped down to wring out all the air, you’ll wonder why you ever checked a bag to begin with. “The compression feature is genius,” one five-star reviewer said. “Just zip everything tight, and boom, it’s like vacuum-sealing your wardrobe (minus the vacuum). I was able to fit way more than I expected, and everything stayed neatly organized. No more suitcase explosions every time I needed socks.” Say, for instance, a stack of blouses is 6 inches high. Those blouses might squash nice and neat into the medium-sized compression cube that’s 4 inches deep. But then, you can zip that cube down to compress it even further and whittle down that 6-inch stack of clothes to just 2 inches or so. And all that saved space adds up, letting you “pack double or triple your clothes in a small suitcase,” one shopper shared. “Just fold your clothes and overpack, then double zip it! Literally watched my clothes shrink as air was let out.” That shopper was able to fit four pairs of shorts, two sets of pajamas, a robe, three shirts, and nine undergarments—into just one of these compression cubes. As a bonus, you won’t be rifling through a jumbled mess of clothing when you go to unpack in your destination. Instead, your belongings arrive neatly organized in dedicated bags to make finding what you need a breeze. “Unpacking took seconds,” one reviewer raved. “I just pulled out the cubes and popped them into drawers.” This six-pack by Bagail includes six different size options, a variety you don’t often get from other brands. Packing cube fans call these “lightweight, but tough as nails,” with ”high-quality and durable” fabric, “reinforced seams and reliable zippers,” and a mesh panel that lets you see what’s inside. They’re also water repellent too, so if your face wash springs a leak, your clothes stand a fighting chance of still arriving unsoiled. You can even pack damp clothes, one shopper said, without fretting over leaks. “If you're an overpacker like me or just want to feel like a travel ninja, do yourself a favor and grab a set,” a recent packing-cube convert wrote. “Your future-suitcase self will thank you.” Snag this six-pack of the compression packing cubes even skeptical shoppers called “a real game changer,” and read on for other compression cubes for travel to level up your packing game. Bagsmart Compression Packing Cubes, Set of 6 Tripped Travel Gear Compression Packing Cubes, Set of 6 Gonex Compression Packing Cubes, Set of 6 OlarHike Compression Packing Cubes, Set of 8 Veken Packing Cubes, Set of 8

Read More